Open, Select And Close Menus; Tuning - Baumann Meyer DT2620D Operating Instruction

Settings

Open, Select and Close Menus

The settings of the unit are accessible via menus. To navigate in the menus proceed as follows:
Picture Audio Timer
Mode Standard
Brightness 050
Contrast 050
Sharpness 050
Colour 050
Tint 050
Colour Temperature
Position OK: Select

Tuning

➤ Starting Automatic Tuning TV Stations
Use this feature to start automatic tuning. The TV channels will be tuned and stored. Later you can
rearrange the sorting of the TV channels as you wish.
You only need to tune the TV channels, if the device is connected to a roof
aerial. If you use a satellite receiver, a decoder or a similar device, the signal
of this device will be shown. Press
18
Install Setup Option
MENU/EXIT: Exit
1 Press
.
The main menu opens. The submenu
selected last will be displayed.
2 If necessary, press
main menu.
3 Press
or to select the desired menu.
Or
4 Press
or to select the desired sub menu.
5 Press
or to set the desired sub menu.
6 Press
to move one menu level up.
7 Press
or to select the desired setting.
8 Press
to activate the desired setting.
9 Press
to save the settings.
and select the desired device.
to return to the