Settings; Switching On; Switching Off; Setting Up For Operation - Baumann Meyer DT2620D Operating Instruction

Settings

Switching On

1
Press the power switch (main) on the back of the unit. (32" model only)
2
Press on the remote control. This switches the unit on and it can be operated using the remote
control.
If it is not explicitly stated otherwise, it will be assumed that the unit and the
TV set are switched on and will be operated by the remote control.
By default, the unit is set to the English language. For information on how to
change the on-screen language later, refer to: "Set Screen Language" on page 25.

Switching Off

➤ Stand by
1
Press on the remote control.
Please note that the unit also consumes a little power when in stand by mode.
➤ Switch Stand by Off
1
Press the power switch (main) on the back of the unit. (32" model only)
Now the unit is switched off completely and does not consume any power.

Setting up for Operation

You can adjust various settings of the unit to adapt it to your requirements.
Settings
17