Install The Interwrite Workspace Software; Connect Your Interwrite Board; Connect The Video Projector; Prepare The Electronic Interwrite Pens And Install The Pen Charging Station - Interwrite Learning Interwrite Board Getting Started

Getting Started Interwrite Board
9
TM
FLOOR STAND MOUNT
After you assemble the floor stand, attach the two Mounting Brackets to the
back of the Interwrite Board using the Phillips screws provided. It requires
two people, one at each end of the Interwrite Board, to mount it on the
floor stand. It is attached using the Knob Screws provided. You can attach
the Pen Tray and/or Pen Charging Station after the Interwrite Board is
mounted on the floor stand.

3. Install the Interwrite Workspace Software

4. Connect Your Interwrite Board

Your Interwrite Board must be able to communicate with the Interwrite
Workspace software on your computer. This communication link is estab-
lished either by means of a physical cable (USB or serial) connection, or
wirelessly between two Bluetooth communication modules—one connected
to the Interwrite Board and one connected to the computer. The computer
will automatically find an Interwrite Board that is connected to it by a cable,
but the wireless Bluetooth Modules must be "connected" by the Interwrite
Device Manager, one of the Interwrite Workspace software applications.

5. Connect the Video Projector

In order to run Interwrite Workspace in Interactive Mode, a video projector
must be connected to the computer.
6. Prepare the Electronic Interwrite Pens and
Install the Pen Charging Station
The Interwrite Marker Pen must be assembled and a battery installed before
use. A battery is installed in the Interactive Pen. The optional Pen Charging
Station is installed on the Interwrite Board and the rechargeable Interactive
Pens must be charged before they can be used. Instructions for attaching the
Pen Charging Station to the Interwrite Board are on page 38. Instructions for
assembling the Marker Pen and the Interactive Pen are on pages 40 and 41.

7. Calibrate Your Interwrite Board

Your Interwrite Board needs to be calibrated to ensure that the tip of the
electronic Interwrite Pen is aligned with the cursor on the projected image.
Any time the Interwrite Board or video projector is moved, the Interwrite
Board must be re-calibrated.