Bluetooth Tm Wireless Installation - Interwrite Learning Interwrite Board Getting Started

Interwrite Board
18
TM
Connect Your Interwrite Board:
Bluetooth
If the computer has the Bluetooth Module built in, an external module is not
needed. Most computers with a built-in Bluetooth Module will also have the
Bluetooth driver software installed. Version 6.xx of the Interwrite software
and version 7.0 of the new Interwrite Workspace software support the three
most common Bluetooth stacks (driver software)—Toshiba, WIDCOM and
Microsoft.
This section of the Interwrite Board Getting Started guide describes how to
install the BTCOM2 Module on the Interwrite Board, install the Bluetooth
software on the PC (it's already installed on the Mac), and connect the
Bluetooth USB Adapter to the computer.
The Interwrite Board and Interwrite Pads in an Interwrite wireless system
communicate with the computer through a single Bluetooth Module con-
nected to the computer. Up to seven Bluetooth-enabled Interwrite Devices—
Boards and Pads—can communicate with the Bluetooth Module connected
to the computer. Only one Bluetooth Module, either built-in or external, can
be connected to the computer at a time.
Wireless Installation
TM
The Interwrite Workspace system employs
Bluetooth TM
lish wireless communication between the
Interwrite Boards and Interwrite Pads and
the computer. A Bluetooth Module must
be installed on each component involved
in wireless communication. The Bluetooth
BTCOM2 Module is installed on the
Interwrite Board. Interwrite Pads have the
Bluetooth Module built in, so no installa-
tion is necessary.) The Bluetooth USB
Adapter shown here is installed on the
computer, if necessary.
Getting Started
wireless technology to estab-