Install The Usb Adapter - Interwrite Learning Interwrite Board Getting Started

Getting Started
Installing the USB Adapter
Plug the USB Adapter into one end of the USB cable and insert the other
end into one of the USB ports
It cannot be plugged into a keyboard USB port on the Mac. The operating
system will auto-detect and configure the new hardware device.
Keeping Track of the Bluetooth Adapter
The Velcro button in your Bluetooth Comm Kit is used to attach the USB
Adapter to the side of your monitor, or to the lid of your laptop. Pull the
button apart, remove the paper backing from both pieces, and stick one
piece to the back of the USB Adapter and the other to the monitor or laptop
lid. Use a USB extension cable to connect to the USB port.
Do not install the USB Adapter behind metal enclosures, as this
will limit performance. Metal serves as a shield and reduces
the signal strength. Mount the Adapter so the top of the unit is
positioned above the computer or monitor case. Use a USB
cable extender when additional length is needed to mount the
USB Adapter away from metal or other enclosures.
Moving the Bluetooth Adapter to Another Machine or
USB Port
The Adapter-to-USB-port and Bluetooth software installation (Windows only)
must be performed by a user with Administrator privileges. If the configura-
tion is changed, that is, if the Adapter is moved to another USB port on the
computer, or if a different USB Adapter is installed in the USB port on that
computer, the process must be managed by the Admin.
Interwrite
on your computer.
Board
21
TM