Installing The Mounting Clips On The - Interwrite Learning Interwrite Board Getting Started

Interwrite Board
42
TM
Installing the Mounting Clips
on the Whiteboard and Wall
The two Mounting Clips, found in the Accessory Kit that
shipped with your Interwrite Board, can be used in conjunc-
tion with a wall mount installation of the board. They fasten
the bottom of the Interwrite Board to the wall to prevent it
from being jostled loose from the Wall Mounting Bracket.
Install the Mounting Clips after the Interwrite Board is hung
from the Wall Mounting Bracket. The hardware for attaching the Mounting
Clips to the wall is not included, as the type of wall on which they will be
mounted varies from installation to installation.
If you are using a ceiling mount projector, be sure the Interwrite
Board is aligned to the projector image before you install the
Mounting Clips to avoid having to reposition the board.
Back of the
Interwrite Board
Mounting
Clip
Interwrite Board
Frame
Front of the
Interwrite Board
Mounting Clip
1 Hook the Mounting Clip over the lip of
the Interwrite Board frame on the back of
the board. Position a Mounting Clip in
each corner at the bottom of the board.
2 Mark the location of the holes in each
Mounting Clip on the wall.
3 Install suitable anchors into the wall.
4 Install screws to secure the Mounting Clips
to the wall. Use two screws per Clip. The
recommended screw size is number 8 or
M4.
Getting Started