Motorola ET1 User Manual page 24

1 - 8 ET1 Enterprise Tablet User Guide
Touch OK.
3.
Wait for the ET1 to power off completely.
4.
Press thumb against the side of the ET1 and battery. Using the index and middle fingers, move the battery
5.
release latch toward thumb.
Pull the battery out of the battery compartment.
6.
Lift the access door.
7.
Lift Access Door
Figure 1-5
Remove the microSD card from the card holder.
8.
Align the replacement microSD card with the card holder. Ensure that the contacts on the card are facing
9.
down and toward the card holder.
Insert the microSD card into the card holder.
10.
Insert microSD Card
Figure 1-6
Close the access door.
11.