Installing The Battery - Motorola ET1 User Manual

1 - 4 ET1 Enterprise Tablet User Guide
Unpacking
Carefully remove all protective material from the ET1 and save the shipping container for later storage and
shipping.
Verify the following items are in the box:
• ET1 Enterprise Tablet with 4 GB micro secure digital (SD) card installed
• 4620 mAh Lithium-ion battery
• Quick Start Guide
• Regulatory Guide.
Inspect the equipment for damage. If any equipment is missing or damaged, contact the Motorola Solutions
Global Customer Support Center immediately. See
Getting Started
To start using the ET1 for the first time:
• Install the battery
• Charge the ET1
• Power on the ET1.

Installing the Battery

To install the battery:
Align the tracks on the side of the battery with the rails in the battery compartment.
1.
Push the battery in until the battery release latch snaps into place.
2.
If the battery is charged, press and hold the Power button for two seconds until the splash screen appears.
3.
page xiii for contact information.