3 - 4
ET1 Enterprise Tablet User Guide
The scanner beeps and the LED turns green to indicate a successful decode.
5.
The captured data appears in the text field.
6.
DataWedge
DataWedge is a utility that adds advanced bar code scanning capability to any application without writing code.
It runs in the background and handles the interface to both built-in and attached bar code scanners. The
captured bar code data is converted to keystrokes and sent to the target application as if it was typed on the
keypad.
Enable DataWedge
To enable DataWedge:
Touch
> DataWedge. The DataWedge Profiles window appears.
1.
Touch the profile to use.
2.
Touch the Profile enabled checkbox. A green checkmark appears in the checkbox.
3.
Touch
.
4.
Disable DataWedge
To disable DataWedge:
Touch
> DataWedge. The DataWedge Profiles window appears.
1.
Touch the profile to use.
2.
Touch the Profile enabled checkbox. The green checkmark disappears from the checkbox.
3.
Touch
.
4.
Configuration
To configure DataWedge refer to the ET1 Enterprise Tablet Integrator Guide.