Mitsubishi Electric CX series Owner's Handbook Manual page 7

S a f e t y & R e g u l a t o r y N o t i c e s
Legalities
This equipment complies with the relevant clauses of the following European
Directives (and all subsequent amendments):
Low Voltage Directive
EMC Directive
Telecommunications Directive
CE Marking Directive
Important
This system, when supplied, complies with the CE Marking Directive and its strict
legal requirements. Use only parts tested and approved by Mitsubishi Electric PC
Division. All expansion cards, drives and peripherals should carry the CE mark.
Standards
Safety
This product complies with the International Safety Standard IEC950 and
additional requirements thereto to comply with European Safety Standard
EN60950.
Electro-magnetic Compatibility (EMC)
This product complies with the following European EMC standards:
Emissions EN50022 Class B
Immunity EN50082-1
This product also complies with the following International EMC standards:
VCCI (Japan) Class B
Notes
All interconnecting cables (for example, signal and communication cables) should
be less than 2 metres in length. If cable extensions are used, ensure adequate earth
connections are provided and screened cables are used.
If any metal casework components are removed, during upgrade work for example,
ensure that all metal parts are correctly re-assembled and all internal and external
screws are re-fitted and correctly tightened.
This system has an on-board network connection. If you add an additional network
card, any attempt to use two network connections simultaneously may result in the
product no longer being compliant with the CE Marking Directive. Consult your
Mitsubishi Electric PC dealer for up to date information.
NOTICES/iv
73/23/EEC
89/336/EEC
91/263/EEC
93/68/EEC