Fitting A 3.5" Drive - Mitsubishi Electric CX series Owner's Handbook Manual

7.

Fitting a 3.5" drive

The drive bay is designed for 5.25" drives. If you intend to fit a 3.5"
device such as a hard disk drive, you must first fit a 3.5" drive bay
adapter such as the one shown below. These are generally available
from PC hardware suppliers.
1.
If the drive you intend to fit is a removable media drive such as
a tape drive or CD writer, flex the plastic blanking plate fitted
in the front bezel and remove it, then break off the metal
blanking plate behind it.
Fit the new drive into the adapter using the special screws
provided. Do not overtighten the screws and put a strain on
the drive casing.
D r i ve U p g r a d e s
A
A
OWNER'S HANDBOOK 6/3