Mitsubishi Electric CX series Owner's Handbook Manual page 66

D r i v e U p g r a d e s
Windows for Workgroups
Use the MS-DOS Fdisk program to partition the disk followed by
the MS-DOS Format command to format the partitions. Use the
MS-DOS Help command to find out more about Fdisk and
Format. See your MS-DOS documentation for instructions on
using MS-DOS Help. A limitation of Windows for Workgroups is
that each partition can be no more than 2 gigabytes in size.
Caution
When you run Fdisk, it assumes that you want to work with the first,
or master, drive (it says the
To switch attention to the slave drive, choose
disk drive
6/6 OWNER'S HANDBOOK
Current fixed disk drive
(option 5) from the main menu.
Select next fixed
is ).
1