Fitting The Rudder Cables - Pipistrel Sinus Build Manual

Fitting the rudder cables

firstly lubricate the cables with WD-40 and also the cable outers.

Feed the cables through from the firewall and into the cabin

Gently tap the end screws into the fuselage

Then find the hole that leads into the cabin and, being careful not to puncture/damage

the cabin interior wall, gently tap the end screw through.
Then feed the cables through the pedal S-pipe, out the end and into the cable outers.

http://www.pipistrel.si
K i t M a n u a l f o r P i p i s t r e l S i n u s a n d V i r u s A i r c r a f t
© Pipistrel Release March 2009 © Page 69 of 267