The main bulkhead comes with a large hole already drilled in the upper left hand corner.
Fit it with the provided rubber grommet and feed the long fuel return line to the left tank.
This is used as the return fuel line to avoid vapor lock.
Tape over fuel line end fittings to keep dust and other debris from entering them during
the rest of construction before the fuel lines are finally fitted.
The construction is now completed for the fuselage in the upside down position. With
the help of others, rotate the fuselage back to the correct position.
Fitting the windscreen
First fit the windscreen support bracket by lining it up with the center of the aircraft
fuselage
Then lay the windscreen into place and line it up with the fuselage center line. The
windscreen will only fit one way and not the other.
http://www.pipistrel.si
K i t M a n u a l f o r P i p i s t r e l S i n u s a n d V i r u s A i r c r a f t
© Pipistrel Release March 2009 ©
Page 118 of 267