Renault Twingo Clio Workshop Repair Manual page 19

Removing the sprocket
nd rd th
The 2 , 3 , and 4 gear supporting rings are fitted
tightened. They will be systematically replaced during
refitting.
With the press, remove the ring, hub, 3
rd
resting under the 3 gear claw teeth.
With the press, remove the rings, 1
hub, sliding shaft unit resting under the 1
MANUAL GEARBOX
Repairing the gearbox
rd
gear unit
st nd
and 2 gears,
st
gear.
21-17
Checking parts
The sprocket teeth and the claws should not be
chipped or excessively worn.
Also ensure that there are no signs of grating or
abnormal wear on the surfaces of the shafts or the
inner walls of the sprockets.
It is advisable to mark the position of the sliding shafts
in relation to the hub.
21