JH
REPLACING THE BEARINGS IN THE MECHANISM
HOUSING
Separate the circlips with circlip pliers and drive the
bearing inside the housing using tool B. Vi. 1576.
REFITTING
Place the new circlips in their respective housings.
NOTE: the circlips have different shapes:
– primary shaft circlip (A),
– secondary shaft circlip (B).
MANUAL GEARBOX
Repairing the gearbox
Fit the bearings using tool B. Vi. 1576.
Knock the tool with the bearing using a small hammer.
19821
19822
21-14
21
19821