Sunwheel Side - Renault Twingo Clio Workshop Repair Manual

JH

Sunwheel side

Remove the bearing retaining circlip (A).
On the press, move the bearing towards the inside of
the housing using a 50 mm diameter tube.
Refit the bearing using a 65 mm diameter tube. The
bearing race must be facing the opposite side to the
crownwheel.
Refit the bearing retaining circlip.
MANUAL GEARBOX
Repairing the gearbox
Refit the differential in the housing.
Fit a wooden shim under the crownwheel.
Fit the circlip (B) on the head (1) of tool B. Vi. 946 and
the head on the sunwheel.
Fit the tool (2) B. Vi. 946 on the head and push with
the press until the circlip falls into place in its channel.
Remove tool B. Vi. 946.
Rotate the assembly and check the rotation of the
speedometer drive gear if fitted.
21-24
21