Miele HM 16-80 Operating Instructions Manual page 27

After the roller has gone through three
or four revolutions and the end of the
ironing cover is under the heater plate:
^ switch off the appliance while keep-
ing the foot pedal pressed down.
The ironing cover is held firmly in place
by the heater plate which is still low-
ered.
^ Tighten the cords at the left and right
hand sides of the roller, tie together
and tuck in.
^ Put the feed board back in place.
^ Switch the rotary ironer on - the
heater plate will rise up.
Maintenance and care
27