Miele HM 16-80 Operating Instructions Manual page 20

Points on ironing
Duvet covers
^ First do up the poppers/buttons. Start
the first run by carefully feeding this
end in first on left side of the roller,
taking care not to damage any but-
tons.
Note: Only pass this end through the
ironer if the poppers or buttons are
heat-resistant.
To iron without a fold:
^ It is best to iron the cover in two runs
lengthwise.
20
If folds are acceptable:
^ Fold the duvet cover lengthwise and
iron both sides.
Pillow cases
^ Lay the pillowcase on the feeder
plate, position under the hot plate
and iron in one procedure.
If the open end has poppers or but-
tons only pass it through the ironer if
they are heat resistant.
Shirts
Remove the feed board before ironing
shirts.
Proceed as follows:
^ cuffs then sleeves
^ back
^ front sections
^ collar