Indicators And Connectors - Air Techniques Accent B5100B Instruction Manual

INDICATORS AND CONNECTORS

Power Button. As shown by Figure 2, the Power Button located on the
top panel of the Control Module, controls operating power as follows.
POWER
BUTTON
Figure 2. Bluetooth A C C E N T Control Module Top View
Front Panel. The specific functions of the LED indicators and connector
(see Figure 3) located on the front panel of the Control Module are
described below.
20-PIN SENSOR
CONNECTOR
SOCKET
Figure 3. Bluetooth A C C E N T Control Module Front View
Green LED indicator
Yellow LED indicator
Blue LED indicator
Sensor Connector Socket
Rear Panel. As shown by Figure 4, the
rear panel of the Control Module has a
center pin connector. This connector
accepts the connection of DC power
connector end from the optional battery
charger AC mains line cord, (P/N B5080).
Power Turn-ON: Depress the Power Button
for approximately 1.5 seconds.
Power Turn-OFF: Depress the Power Button for
approximately 5 seconds to turn off Control
Module. Observe that Green and Yellow
LEDs illuminate then extinguish.
Illuminates green upon power turn on
then flashes briefly to indicate that the
system is operating.
Blinks yellow to indicate that system is
ready for image acquisition.
Illuminates steady yellow to indicate that
the A C C E N T system has an image.
Extinguishes during image transfer.
Illuminates solid blue to indicate that the
A C C E N T system is linked to the computer.
Blinks blue during image transfer.
Accepts connection of either Size 1 or 2
A C C E N T Sensor.
Figure 4. Bluetooth
A C C E N T Control Module
14
GREEN
BLUE
YELLOW
Rear View