Setting Up The Piano - Kawai CE220 Owner's Manual

section

Setting Up the Piano

1. Connecting the power cable to the instrument
Connect the included power cable to the 'AC IN' inlet located on
the underside of instrument.
3. Turning on the power
Press the POWER SWITCH located on the right hand side of the
front panel.
The instrument will turn on. The LED indicator for the PIANO
button will also turn on, indicating that the Concert Grand sound
is selected, and the CE220 digital piano is ready to be played.
Using headphones
Use the jacks located beneath the keyboard on the left hand side,
to connect stereo headphones to the CE220 digital piano.
Two pairs of headphones can be connected and used
simultaneously. When a pair of headphones is connected,
sound will not be produced by the speakers.
12
2. Connecting the power cable to an outlet
Connect the instrument's power cable to an AC outlet.
4. Adjusting the volume
The MASTER VOLUME slider controls the volume level of the
instrument's speakers, or headphones if connected.
Move the slider to the right to increase the volume, and to the
left to decrease the volume.
Decrease
volume
Use this slider to set the volume to a comfortable listening level
- the middle is often a good starting point.
Attaching the headphone hook (optional)
A headphone hook is included with the CE220 digital piano and
can be used to hang headphones when not in use.
If desired, attach the headphone hook to the underside of the
keyboard as shown in the illustration below.
Increase
volume