IBM 3270 Operator's Manual page 37

)( .-f-+ -
Go Elsewhere
This message appears if you try to take an action in the wrong location, such as:
• To enter, insert, erase, or delete a character when the cursor is in a protected
field.
• To read a magnetic stripe when the cursor is in a protected field.
• To perform a cursor select operation when the cursor is not in a valid cursor
select field (refer to CURSR SEL key description in the keyboard sections).
Press the RESET key to restore your keyboard; then move the cursor to another
location or take a different action.
)( f
> -
Too Much Data
This message appears if you try to enter more data into a field than it can hold.
Press the RESET key to restore your keyboard; then correct the en try.
)( f f'"0~
U
r o
,ol -
Numeric Data Only
This message appears if you try to enter a non-numeric character (other than
0-9, ., -, or DUP) into a numeric field. Press the RESET key to restore your
keyboard; then enter numeric data. To override the numeric control, use 1}
or
~ (~
key is present on Data Entry keyboards only).
)( fU1' -
What Number?
This message tells you that only certain numbers can be entered for the operation
you are performing. For example, this message is displayed when you:
• Enter an invalid Printer ID or Printer Class during a print operation (refer to
IDENT key description in the keyboard sections)
• Make an error when your display station is in test mode (follow test instruc-
tions in the Problem Determination Guide)
Press the RESET key to restore your keyboard; then enter the correct number.
2-22