Cisco TelePresence System EX90/EX60
Contents
The web interface
The web interface allows for remote administration of the
system.
Connect to the EX90/EX60
Open a web browser and enter the IP address of the
codec.
How to find the IP address:
•
To find the IP address, open the System Information
page on the touch screen controller. Tap the icon in
the lower left corner and select Settings > System
Information.
Password protection
The web interface can be password protected. It uses the
same user name and password as defined for the codec
that is integrated in the EX90/EX60.
Read more about password protection in the
Protection
section in this guide.
D14726.03
Cisco TelePresence System EX90-EX60 Administrator Guide TC4.0, December 2010.
Copyright © 2010 Cisco Systems, Inc. All rights reserved.
Introduction
Using the web interface
Signing in to the web interface
Password
Advanced configuration
1
Enter the IP address
of the EX90/EX60.
10
Administrator guide
Appendices
2
Enter the user name (admin) and
password and press Sign in.
www.cisco.com
Need help?
Do you have a question about the EX90 and is the answer not in the manual?
Questions and answers