Audit Certificate - Cisco EX90 Administrator's Manual

Cisco TelePresence System EX90/EX60
Contents

Audit certificate

The list of trusted audit certificates is a list containing all
audit servers that your codec trusts.
If the audit logging mode is set to ExternalSecure, the audit
logging information will only be sent to entities holding a
valid audit certificate.
About audit logging
Audit logging records all login activity and configuration
changes on the codec.
Audit logging is disabled by default, and can be enabled
using the web interface or the command line interface.
Uploading the audit certificate list
To install the audit certificate, you will need:
• Audit list file ( .PEM format)
Contact your system administrator to obtain the required
file.
• Press Browse... and locate the file with the audit list file
(.PEM format).
• Press Upload to upload the certificate to the codec.
Enable secure audit logging
When you have uploaded the audit certificate list you must
enable secure audit logging:
1. Navigate to Advanced Configuration > Security > Audit
> Server and enter the IP address of the audit server.
2. Navigate to Advanced Configuration > Security > Audit
> Logging > Mode and set it to ExternalSecure.
D14726.03 Cisco TelePresence System EX90-EX60 Administrator Guide TC4.0, December 2010.
Copyright © 2010 Cisco Systems, Inc. All rights reserved.
Introduction Using the web interface
Certificates for secure logging
Advanced configuration
19
Administrator guide
Appendices
www.cisco.com