Cisco EX90 Administrator's Manual page 14

Cisco TelePresence System EX90/EX60
Contents
User management, continued...
If you have ADMIN rights you can manage users as
described below.
How to create a new user account
1. Press Create new user.
2. Fill in the Username, Password and PIN code, and select
the user role(s) for this user account. As a default the
user have to change the password and PIN code when
signing in for the first time.
3. Set the Status to Active to activate the user.
4. Press Save to save the changes.
How to edit user details
1. Select the name of an existing user to open the Editing
user window.
2. Edit the details.
3. Press Save to save the changes or Cancel to go back
one step without storing the information.
How to deactivate a user account
1. Select the name of an existing user to open the Editing
user window.
2. Set the Status to Inactive.
3. Press Save to save the changes.
How to delete a user account
1. Select the name of the user to open the Editing user
window.
2. Press Delete.
NOTE: Do not delete all users with ADMIN rights.
D14726.03 Cisco TelePresence System EX90-EX60 Administrator Guide TC4.0, December 2010.
Copyright © 2010 Cisco Systems, Inc. All rights reserved.
Introduction Using the web interface
Creating and editing users
Advanced configuration
14
Administrator guide
Appendices
www.cisco.com