Dometic HB 2500 Operation, Maintenance And Installation Manual page 9

Automatic mode
1
2
3
4
5
1
note : In this mode the machine manages the compressor, heat pump and fan
speed entirely automatically by comparing the set temperature with the
internal temperature according to table A.
2
note : on automatic speed the correct ventilation is set according to the differ-
ence in temperature between the set point and the ambient temperature.
Operating instructions for users
Press the on/off button to switch on
the machine.
Press the change mode button to
select automatic mode 1 .
The temperature selection buttons
are disabled.
Press the fan speed button to
select low, medium or high speed
or automatic speed 2 .
Press the on/off button to switch off
the machine. This mode stays in
memory for switching on the next
time.
TABLE A
Internal tem-
T≤20°C
perature
Heat pump
Operating
o
mode
ventilation
Set point 20°C
Cold mode
1
2
3
4
5
7
General information
20°C<T<25°C T≥25°C
Dehumidifi cation
o Cold
ventilation
22°C 25°C
Press the on/off button to switch on
the machine.
Press the change mode button to
select cold mode.
Press the selection buttons to set
the ambient temperature on the
desired value between 18°C and
30°C.
Press the fan speed button to
select low, medium or high speed
2
or automatic speed .
Press the on/off button to switch off
the machine. This mode stays in
memory for switching on the next
time.
HB2500
1
GB