Choice Of The Place Of Installation - Dometic HB 2500 Operation, Maintenance And Installation Manual

2
Information on installation

2.2. Choice of the place of installation

GB
To accomplish uniform climate control in a vehicle, the machine must
be installed as near the middle as possible, in a housing or a similar
device.
Position the machine so as to ensure easy access for servicing and to
facilitate disassembly and installation.
Place the assembly template in the compartment intended for installa-
tion and check the space available for the openings in the fl oor.
To minimize the transmission of noise and vibration during operation,
the machine must have a minimum clearance on each side of 30 mm
from the walls and fi ttings,
The machine must be installed on the fl oor.
To make renewing the fi lter easier, keep a distance of 200 mm between
the front of the machine and the walls of the compartment.
If fi tting in external compartments (e.g., false bottoms), the air to be
treated must be drawn in from the vehicle's passenger compartment.
Drawing in outside air can signifi cantly reduce the power of the system.
Operating instructions for users
15 HB2500