Installing And Changing Batteries; Description Of The Receiver - Dometic HB 2500 Operation, Maintenance And Installation Manual

1.6. Installing and changing the remote
control batteries
Take off the battery cover.
Insert the two batteries supplied (size AAA), paying attention to their
polarity.
Fit the battery cover back on.
Check the remote control works properly by pressing the on button:
if, on pressing the button, no icon appears on the display then you
need to re-install the batteries checking their polarity. The machine is
connected to the power supply and ready for use.
Operating instructions for users

1.7. Description of the receiver

The receiver panel is composed of a display and four LEDs of dif-
ferent colours.
The display switches on whenever it receives pulses from the remote
control to display the temperature setting; after a few moments the
ambient temperature is displayed and then it switches off.
The four LEDs signal the machine's functional status.
The red LED signals power on.
The blue LED signals that the machine is working in night mode.
The green LED signals that the compressor is working.
The yellow LED: on steady signals that one of the timer modes has
been turned on; blinking signals that the ventilation is temporarily
suspended.
green LED
display
blue LED
11
General information 1
yellow LED
signal receiver
red LED
HB2500
GB