Table of Contents
Advertisement
BIOS Updating Procedures
Chapter 6:
Introduction
Disk Updating Procedures
The BIOS ROMs use Flash technology. Rather than disassembling the
workstation and physically replacing the ROMs, you simply flash a
new software version of the BIOS into the existing ROM. The BIOS can
be flashed from a disk, a CD-ROM, or across a LAN.
7452-10xx, 20xx, and 30xx software is provided on disk only. 7452-35xx
and 40xx software is provided on disk and CD-ROM. This chapter
describes how to use a disk and/or CD-ROM to update the BIOS.
Note: This software cannot program a blank ROM.
The following sections describe how to use disks to update the BIOS.
Advertisement
Table of Contents
