Table of Contents
Advertisement
Connection to 5963 LCD Touch Screen Display and Keyboard
13. Remove the Cable Cover from the 5963.
14. Connect the LCD Cable from the 5963 to the LCD connector on the
PCI LCD Board. Route the cable through the channel on the bottom
of the Mount Assembly. A PS/2 Keyboard can be plugged directly
into the 5963 via the Keyboard port in the 5963. Route the keyboard
cable the same way you routed the LCD cable.
15. Replace the Cable Cover.
Note: Leave sufficient slack in all cables so the 5963 can be tilted.
Note: Ensure that the 5963 Keylock is NOT in the Locked (L) position.
This completely locks out the keyboard operation.
Caution: Do not use an extended keyboard cable – it may not supply
sufficient voltage.
Chapter 3: Installing Optional Hardware Features 3-51
Advertisement
Table of Contents
