Table of Contents
Advertisement
6-2
Chapter 6: BIOS Updating Procedures
Updating Procedure: 7452-10xx/20xx
Boot the workstation using Disk 1 of the 7452 BIOS and BIOS Update
Software (P/N: 497-0417802) and the Startup Menu displays:
1. Flash 7453 PC BIOS
(Model 10XX, 20XX, 30XX)
2. Flash Memory Dump ROM
(Model 10XX, 20XX, 30XX)
3. Flash NT Mem Dump ROM
(Model 20XX, 30XX)
4. Flash LCD BIOS on ISA Card
(Model 10XX, 20XX, 30XX)
5. Flash AMD BootWare 1.x LAN Boot ROM
30XX)
6. Flash AMD MBA 4.x LAN Boot ROM
30XX)
Note: If you will be updating the LCD BIOS on the ISA Board, read
the instructions in that section before proceeding.
Updating the PC BIOS
1. To update the PC BIOS select Item 1 (Flash 7452 PC BIOS) from the
Startup Menu and then press Enter. The PC BIOS selections display:
1. Flash PCBIOS on 7452-10xx (80486)
2. Flash PCBIOS on 7452-20xx (Pentium)
3. Flash PCBIOS on 7452-30xx (686)
2. Select Item 1 (7452-10xx) or Item 2 (7452-20xx) and then press Enter.
If you make a wrong selection, an error message displays. Reboot
and try again.
1. After a successful BIOS update, reboot the workstation.
Updating the Memory Dump ROM
Note: The hardware must be installed and enabled to successfully
update the Memory Dump ROM.
(Model
(Model
Advertisement
Table of Contents
