Installation And Setup; Rear View - Liebert GHT MT+ User Manual

2. Installation and Setup

NOTE: Before installation, please inspect the unit. Be sure that nothing inside the package is
damaged. Please keep the original package in a safe place for future use.
NOTE: There are two different types of online UPS: standard and long-run models. Please refer
to the following model table.

2-1. Rear View

1000(L) TOWER
1000(L) RACK
1. Programmable outlets: connect to non-critical
loads.
2. Output receptacles: connect to mission-
critical loads.
3. AC input
4. Input circuit breaker
5. Network/Fax/Modem surge protection
6. Emergency power off function connector
(EPO)
Model Type
1000
2000 Standard
3000
2000(L) TOWER
2000(L) RACK
Model
1000L
2000L Long-run
3000L
7. USB communication port
8. RS-232 communication port
9. SNMP intelligent slot
10. External battery connection (only available
for L model)
11. Output terminal
12. Output circuit breaker
3
Type
3000(L) TOWER
3000(L) RACK