Table of Contents
Advertisement
3-2. LCD Display
Display
Backup time setting and information
Setting operation
Fault & warning information
Mute operation
UPS information
Load information
Programmable outlets information
Mode operation information
Function
Indicates the backup time in pie chart.
Indicates the backup time in numbers.
H: hours, M: minute, S: second
Indicates the setting operation.
Indicates that the warning situation occurs.
Indicates the warning and fault codes, and the codes are listed in
details in 3-5 section.
Indicates that the UPS alarm is disabled.
Indicates the input and output voltage, frequency, battery voltage,
load information, and internal temperature.
Vac: input/output voltage, Vdc: battery voltage, Hz: frequency, %: load level,
°C/°F: temperature,
Indicates the load level by 0-25%, 26-50%, 51-75%, and 76-100%.
Indicates overload.
Indicates the load or the UPS output is short circuit.
Indicates that programmable management outlets are working.
Indicates the UPS is in online mode.
7
Advertisement
Table of Contents
