Control Operations; General; Maneuvering Of Side Mount Control; Shifting And Control Speed - Scarab jet boat Owenrs Manual

9. Once engine has warmed up, check to see if high
temperature warning message code is displayed.
If not displayed the engine temperature is stay-
ing within optimum range. If warning message is
displayed, stop engine immediately and inspect for
cause of high reading.
10. With engine running, verify that no high or low
voltage code is displayed. No message code indi-
cates that the battery is in good condition.
11. Inspect for fuel odors and visible leaks in the fuel,
oil, coolant, and exhaust systems.
12. Make sure boat is securely moored to the dock
and engine is idling. Then move the throttle for-
ward and then aft and back to neutral to check for
proper operation of the shifting motion. Be careful.
Leave the engine in gear for only a split-second.
D - 5

CONTROL OPERATIONS

A. General
NOTICE
The control information included in this section is
on your boat, refer to the control manufacturer's
literature and engine manufacturer's literature
completely understand the operation of the con-
trols before operating your boat. Also consult your
dealer should any questions arise regarding the
operation of the control unit.
NOTICE
If your boat is equipped with a non-OEM remote
operate it.
B. Maneuvering of Side-Mount Control
Shifting and engine speed are controlled with the
same lever (1). See Figure D3.
N
engaged.
F
movement (ahead).
Operation - Section D
R
movement (astern).
T - Engine speed control.
Figure D3: Side-Mount Control Operation
1) Move lever (1) to the neutral position (N).
2) Press in button (2), press the gear shift release
lever and move the lever slightly forward and
release the button.
The shift function is now disengaged the lever only ef-
fects engine speed. When the lever is moved back to
the neutral position it will automatically re-engage the
shift function. The shift function is then enabled.
C. Shifting and Control Speed
position will engage neutral start switch and allow
engine to start.
NOTICE
For additional information, refer to the sec-
tion on "Starting and Oper ation" in the engine
manu facturer's manual.
Owner's Manual Page 81