Fuel And Water Drain Valve Removal And Installation; Stand Pipe And Heating Element Removal And Installation - Ford 7.3 DIT Power Stroke Service Manual

Fuel drain valve
Left hand threads
7. 3L DIT ANTHOLOGY
Pre January 1998
Fuel Filler Service
Fuel enol Water Drain Val·n
Removal and lnatallation
• Remove the two phlilips head retaintng
screws
• Tilt dram valve away from the filter houstng,
note the location of the o-rings.
Pull valve downward to separate from
housing.
• To reinstall drain valve reverse steps and
tighten screws to 2Q-25 lbllin
(2.3-2.8 Nm).
Stanol Pipe enol Heating Elaaant
Ra•nal enol lnatallatioa
• Drain fuellrom filler housing.
• Remove fuel filler lid and filter element
• Note: Stand pipe Is plastic and has tell
hand threads.
• Using a 7/8' crows foot remove stand pipe
by rotating It in a clockwise direction.
• Disconnect the internal one wire
connection at the fuel heater connector
Remove fuel heating etemei'IL
• To reinstall, reverse steps and tighten
standpipe to 120 lbflln (13.6 Nm).
37