Camera Title/Alarm Screen - JVC DOME TYPE CAMERA TK-C676 Instructions Manual

CAMERA TITLE/ALARM Screen

This screen sets items related to titles and alarms.
Item
CAM. TITLE EDIT ..
This sets the title which is displayed permanently at the bottom left of the picture.
This title can be up to 16 characters in length.
P. 30, "CAMERA TITLE Setup"
AREA TITLE The 360° panning range can be divided into 16 areas and a title, of up to 16-
character in length, can be set for each area. As the camera is panned manually
these area titles are displayed. This function determines whether area titles are
displayed or not.
ON : Display area titles.
OFF : Do not display area titles.
AREA TITLE EDIT ..
Sets the area titles.
P. 31, "AREA TITLE Setup"
ALM. TITLE SIZE Sets the size of the characters in the alarm title. (Displayed when an alarm is acti-
vated.)
NORMAL : Same size as the characters used in the menu screen.
DOUBLE : Double the size, both horizontally and vertically, of the characters used
ALM. TITLE COLOUR Sets the color of the alarm titles.
Setting values: WHITE, YELLOW, CYAN, GREEN
ALARM TITLE EDIT ..
Sets the alarm titles.
P. 32, "ALARM TITLE Setup"
ALARM INPUT ..
Sets the configuration of the alarm input terminals on the Ceiling Mount.
The picture can be turned black-and-white mode when an alarm signal is input.
P. 25, Item "B&W"
MEMO
●
When the item "B&W" is set to ALARM 1 to 4, [B&W] will be displayed at the correspond-
ing ALARM IN 1 to 4 items and the setting cannot be varied.
●
When ALARM IN 1 to 4 are set to positions between POS 64 and POS 99, switching to
the preset position does not occur even when an alarm signal is input.
ALARM IN1 Sets the camera position for alarm 1. When an alarm signal is input to the Alarm 1
input terminal, the camera moves to this set position.
HOME means the home position and POS1 means position 1.
Setting values: OFF, HOME, POS1 to POS99.
ALARM IN2 Sets the camera position for alarm 2. When an alarm signal is input to the Alarm 2
input terminal, the camera moves to this set position.
HOME means the home position and POS1 means position 1.
Setting values: OFF, HOME, POS1 to POS99.
ALARM IN3 Sets the camera position for alarm 3. When an alarm signal is input to the Alarm 3
input terminal, the camera moves to this set position.
HOME means the home position and POS1 means position 1.
Setting values: OFF, HOME, POS1 to POS99.
ALARM IN4 Sets the camera position for alarm 4. When an alarm signal is input to the Alarm 4
input terminal, the camera moves to this set position.
HOME means the home position and POS1 means position 1.
Setting values: OFF, HOME, POS1 to POS99.
Function & Setting
in the menu screen.
Initial Value
–
OFF
–
DOUBLE
WHITE
–
–
OFF
OFF
OFF
OFF
E-21