Camera Mode Select Screen - JVC TK-C700U - Color Cctv Camera Instructions Manual

Menu settings (continued)

CAMERA MODE SELECT screen

Item
V.PHASE Set when adjusting the vertical of other cameras operating in
the line lock (LL) mode.
Adjust while viewing the screen.
The value will become smaller when the pan/tilt lever is pressed
to the left (8).
The value will become larger when the pan/tilt lever is pressed
to the right (t).
POSITION TEXT Used to set the display position of position titles.
LOCATION UP:
DOWN: positions the title at the bottom of the screen.
L:
C:
R:
AUTO FLIP The camera is flipped over automatically by 180 degree at the
tilting limit.
(This makes it possible for the camera to continue tilted straight
down ward.)
ON:
OFF: Auto flip will not funtion
VAR.PAN SPEED The panning speed is varied automatically according to the zoom
ratio of the lens.
(The panning speed decreases when the zoom lens is set near
TELE and increases when it is set near WIDE).
ON:
OFF: Var. pan speed will not function
AREA TITLE The Area Title function divides the space covered by a camera
into sixteen units, with a 16-character ID allocated to each unit.
(AREA 1 ~ AREA16)
The set AREA TITLE is displayed when manually panning the
camera.
ON:
OFF: Area title is not displayed
ALM.TEXT SIZE The character size to display during ALARM is set.
12
Function
positions the title at the top of the screen.
positions the title towards the left of the screen.
positions the title in the center of the screen.
positions the title towards the rigt of the screen.
Auto flip will funtion
Var. pan speed will function
Area title is displayed
A L A R M
NORMAL SIZE
A L A R M
DOUBLE SIZE
Variable
range
0 ~ 255
UP–L, DOWN–L
UP–C, DOWN–C
UP–R, COWN–R
OFF
ON
OFF
ON
OFF
ON
NORMAL
DOUBLE
Factory
setting
127
UP–L
OFF
OFF
OFF
DOUBLE