Preparing To Use The Scale - Excell SI-132 User Manual

EXCELL PRECISION CO., LTD

PREPARING TO USE THE SCALE

1. Locate the scale on a firm level surface free from vibrations for
accurate weight readings.
2. Adjust the four levelling feet (if fitted) to set the scale pan level using
the spirit level bubble located at the front of the scale.
3. Avoid operating the scale in direct sunlight or drafts of any kind.
4. If possible avoid connecting the scale to ac power outlet sockets which
are adjacent to other appliances to minimise the possibility of
interference affecting the performance of the scale.
5. Remove any weight that might be on the weigh pan before the scale is
switched on and avoid leaving weight on the pan for long periods of
time
6. All goods weighed should be placed in the centre of the weigh pan for
accurate weighing. The overall dimensions of the goods being
weighed should not exceed the dimension of the weigh pan.
7. Once the scale has been powered on, it will go through an LCD display
test and it is ready for use when the display shows zero.
8. The scale requires 15~20 minutes warm up before operation to ensure
best accuracy.
9. Please note when the
batteries need to be replaced.
SI-132 v1.1
symbol keeps flashing on the screen, the
3 SME300000081