EXCELL PRECISION CO., LTD
2-5-7 Reset of Auto Transmission
Select
to Reset of Auto Transmission.
ACTIONS
Press TARE key
Use ON/ZERO or UNITS
keys to key in the desired
parameters
Press TARE key
Key in the parameter "00"
Press TARE key to exit
RS232 bi-direction function
setting
4 When the parameter is set as
available. It is because when the zero is stable, the transmission becomes
"Continuous Transmission".
SI-132 v1.1
in the RS232 serial interface setting mode
DISPLAY
29
NOTE
Reset of auto transmission
The LCD shows the last setting
4 Default setting:
Reset of auto transmission
Use
or
ON/ZERO
desired parameters:
=
=
=
ON/ZERO key ⇒ Upward key (from 0 to 9)
UNITS key ⇒ Downward key (from 9 to 0)
TARE key ⇒ Move the cursor to right
NET/GROSS key ⇒ Move the cursor to left.
, the "Auto transmission" function is not
keys to key in the
UNITS
00 division of weight value
01 division of weight value
99 divisions of weight value
SME300000081