Matrox Avio F120 Series User Manual page 11

Connector
Headphones
Line-in
Line-out
Main USB
Microphone
PS/2 keyboard
PS/2 mouse
SFP+
USB 2.0
Debug
Description
Connect your headphones to this connector.
This connector supports a 3.5 mm stereo jack.
While headphones are connected, the line-out
connector remains enabled.
Connect the line-out connector of your
computer (host) or of another audio device
(local or remote) to this connector. This
connector supports a 3.5 mm stereo jack.
Connect the line-in connector of your computer
(host) or of another audio device (local or
remote) to this connector. This connector
supports a 3.5 mm stereo jack.
Use the USB cable provided to connect your
computer to your transmitter unit. This
connection is required to use any USB device
on your transmitter and receiver unit.
Note: For host systems that don't support
keyboards and mice through a USB hub, you
need to use the dedicated USB connectors if
you're using a USB keyboard and mouse.
Connect your microphone to this connector.
This connector supports a 3.5 mm stereo jack.
Connect your PS/2 keyboard to this connector.
Host: To be able to connect your computer to
the host PS/2 keyboard connector on your
transmitter, you need a male-to-male PS/2
cable. To purchase this cable, see the Matrox
online store (shopmatrox.com).
Connect your PS/2 mouse to this connector.
Host: To be able to connect your computer to
the host PS/2 mouse connector on your
transmitter, you need a male-to-male PS/2
cable. To purchase this cable, see the Matrox
online store (shopmatrox.com).
Use a Duplex LC-LC fiber optic cable to
connect your Avio transmitter and receiver units
to each other. While a fiber optic cable is
connected to the unit and your unit is plugged
in, the optical connection LED (
(green).
Connect your USB devices to this connector.
This USB connector is reserved for Matrox
technical support use only.
Required host
connection
Line-in
Line-out
Line-in
Line-out
PS/2 keyboard
PS/2 mouse
) is active
Main USB
Matrox Avio Series – User Guide 11