Table of Contents
Advertisement
Input AC voltage range
Input frequency
Input connector
Output voltage
Output connector
Maximum power consumption
Audio
Stereo audio
Bits per sample
Sampling rate
Audio connector type
Stereo crosstalk
Full-scale voltage
Minimum impedance
Total Harmonic distortion and Noise
(THD+N)
Signal-to-noise ratio (SNR)
Notes
An Avio F120 transmitter requires an Avio F120 receiver.
Your Matrox product is 100% VGA compatible and supports all VESA® standards: VBE
3.0 (Super VGA modes), DPMS (energy saving), DDC-2B (Plug-and-Play monitor), and
DDC-CI.
The display resolutions and refresh rates available depend on your graphics hardware,
display driver, software monitor settings, and monitor. For information on the
capabilities of your monitor, see your monitor documentation.
Your transmitter and receiver units use the same multi-display configuration and
monitor settings (such as display resolution and refresh rate).
External power supply
100 to 240 V AC
50-60 Hz
IEC 60320-C14
+12 V DC
DIN 4 male (4-pin) with lock
30 W
2 channel
24 bits per channel, 2 channel (Left and Right)
96 kHz
3.5 mm stereo audio jacks
-80 dB
1 V
(2.83 V
RMS
10k Ohms
< -80 dB
>76 dBA
Matrox Avio Series – User Guide 19
)
P-P
Advertisement
Table of Contents
