When You Have Problems Operating The Machine - Ricoh MP 2553 Series Read Me First

When You Have Problems Operating the
Machine
Problem
When the machine is turned
on, the only icon that
appears on the home screen
is the [Copier] icon. (When
using the standard operation
panel)
The machine has just been
turned on and the User Tools
screen is displayed, but the
User Tools menu has items
missing.
The indicator lamp remains
lit and the machine does not
enter Sleep mode even
though the [Energy Saver]
key was pressed.
The display is off.
Nothing happens when the
[Check Status] key or the
[Energy Saver] key is
pressed.
The power turns off
automatically.
Causes
Functions other than the
copier function are not yet
ready.
Functions other than the
copier function are not yet
ready. Time required varies
by function. Functions
appear in the User Tools
menu when they become
ready for use.
This occurs in the following
cases:
• The exposure glass
cover or ADF is open.
• The machine is
communicating with
external equipment.
• The hard disk is active.
The machine is in Sleep
mode.
The power is turned off.
The Weekly Timer setting is
set to [Main Power Off].

When You Have Problems Operating the Machine

Solutions
Wait a little longer.
Wait a little longer.
• Close the exposure glass cover or
ADF.
• Check if the machine is
communicating with external
equipment.
• Wait a little longer.
Press the [Energy Saver] key or the
[Check Status] key to cancel Sleep
mode.
Make sure the main power indicator is
off, and then turn on the power.
Change the Weekly Timer setting. For
details about the Weekly Timer setting,
see "Timer Settings", Connecting the
Machine/ System Settings.
175