Ricoh MP 2553 Series Read Me First page 229

Message
"Magazine or Booklet mode
is not available due to mixed
image mode."
"Maximum number of sets is
n."
(A figure is placed at n.)
"Memory is full. nn originals
have been scanned. Press
[Print] to copy scanned
originals. Do not remove
remaining originals."
("n" in the message
represents a changeable
number.)
"Press [Continue] to scan
and copy remaining
originals."
"Rotate Sort is not available
with this paper size."
"Stapling capacity
exceeded."
Messages Displayed When Using the Copy/Document Server Function
Causes
You selected the
"Magazine" or "Booklet"
function for originals
scanned using different
functions, such as copy and
printer.
The number of copies
exceeds the maximum copy
quantity.
The scanned originals
exceed the number of pages
that can be stored in
memory.
The machine checked if the
remaining originals should
be copied, after the scanned
originals were printed.
A size of paper for which
Rotate Sort is not available is
selected.
The number of sheets per set
is over the staple capacity.
Solutions
Make sure originals for the
"Magazine" or "Booklet" function are
scanned using the same function.
You can change the maximum copy
quantity from [Max. Copy Quantity] in
[General Features] under [Copier /
Document Server Features]. For details
about Max. Copy Quantity, see
"General Features", Copy/ Document
Server.
Press [Print] to copy scanned originals
and cancel the scanning data. Press
[Clear Memory] to cancel the scanning
data and not copy.
Remove all copies, and then press
[Continue] to continue copying. Press
[Stop] to stop copying.
Select a proper paper size. For details
about paper, see "Sort", Copy/
Document Server.
Check the stapler capacity. For details
about the stapler capacity, see
"Specifications for Internal Finisher",
"Specifications for 1000-Sheet
Finisher", or "Specifications for Booklet
Finisher", Maintenance and
Specifications.
183