6.9
DISPLAY PCB REMOVAL/INSTALLATION
Removal
1.
Complete the procedure described in paragraphs 6.2 and 6.4.
2.
Lift the Display PCB up to remove it from the top case (Figure 6-8).
Grounding clip
Installation
3.
Slide the Display PCB into the grooves in the top case, being careful to
align the male pins from the Display PCB to connector J4 on the UIF PCB.
4.
Complete the procedure in paragraph 6.5.
Figure 6-8: Display PCB
Section 6: Disassembly Guide
J4
6-9