5.8
Latch Retainer
To remove the latch retainer, complete the following steps:
1. Prepare the computer for disassembly (Section 5.4).
2. Remove the system unit cover (Section 5.7).
3. Rotate the Easy Access Drive Cage to its upright position.
4. Remove the retaining screw that secures the latch retainer to the side of the chassis and remove
the latch.
Figure 5-8. Removing the Cover Release Latch
To install the latch retainer, reverse the above procedure.
CAUTION: Do not overtighten the latch retaining screw. Doing so may not allow the system unit cover to
be properly secured.
5-12
Removal and Replacement Procedures