Setting Up A Wired Connection - THOMSON TG797n Setup And User Manual

Manual Installation
3.3.2

Setting up a Wired Connection

Requirements
 Both your network device (for example, a computer, a gaming console,...) and Thomson Gateway must
have a free Ethernet port.
 Your network device must be configured to obtain an IP address automatically. This is the default setting.
Ethernet cable
In your package, you will find a cable with yellow connectors. This is the Ethernet cable.
Procedure
Proceed as follows:
1 Connect one end of the Ethernet cable to one of the
2 Connect the other end of the Ethernet cable to your network device.
The Thomson Gateway does not support Power over Ethernet (PoE). All network devices that
are connected to the Thomson Gateway must be powered by their own power source.
3 Your network device is now connected to your network. No additional configuration is needed unless
specified by your service provider.
28
yellow Ethernet ports of your Thomson Gateway:
DMS-CTC-20101208-0018 v1.0