3
Manual Installation
Installation
This chapter will help you to manually install your Thomson Gateway.
Setting up your network
Proceed as follows:
1
Connect your Thomson Gateway to your service provider's network.
For more information, see
on page
22.
2
Power on the Thomson Gateway.
For more information, see
3
Connect your computer to the Thomson Gateway.
For more information, see
4
Configure your Thomson Gateway.
For more information, see
5
Connect your (DECT) phones
For more information, see
6
Share your content or media on your local network, continue with
Gateway" on page
7
Once you successfully installed your Thomson Gateway, it is recommend to backup your configuration.
This will allows you to return to this configuration when needed (for example, after misconfiguration).
For more information, see
DMS-CTC-20101208-0018 v1.0
"3.1 Connecting the Thomson Gateway to your Service Provider's Network"
"3.2 Powering on the Thomson Gateway" on page
"3.3 Connecting Your Network Devices to the Thomson Gateway" on page
"3.4 Configure the Thomson Gateway" on page
"6 Telephony" on page
65.
"4.2 Backing Up/Restoring your Configuration" on page 37
Manual Installation
29.
45.
"8 Sharing Content on your Thomson
25.
26.
21