3.3.1
Setting up a Wireless Connection
The Thomson Gateway access point
Your Thomson Gateway is equipped with a wireless access point that supports the following standards:
IEEE 802.11n (2.4 Ghz)
IEEE 802.11g
IEEE 802.11b
Requirements
Your network device must be equipped with a WiFi-certified wireless client.
Connection speed
When setting up your wireless network, keep in mind that the following factors may have a negative impact
on your wireless connection speed:
The obstacles (walls, ceilings,...) between the wireless client and the access point.
Distance between the wireless client and the access point.
To fully benefit from the improved connection speed offered by the IEEE 802.11n standard, it is
recommended to only connect IEEE
(for example, IEEE 802.11g) wireless clients may also slow down connection speed of the IEEE 802.11n
capable clients.
If you have problems with your wireless performance, see
page
103.
To set up a wireless connections
For more information on how to setup a wireless connection between your network device and your
Thomson Gateway, see
DMS-CTC-20101208-0018 v1.0
802.11n
wireless clients to your Thomson Gateway. Connecting older
"5 The Thomson Gateway Wireless Access Point" on page
Manual Installation
" Poor Wireless Connectivity or Range" on
39.
27