Terminal Connection To The Host Computer; Rs-232 Connection Via Cradle - Datalogic Formula F7400 User Manual

CONNECTIONS ________________________________________________________________
4.2.

TERMINAL CONNECTION TO THE HOST COMPUTER

Before continuing with this phase, be sure both the computer and
the F7400 terminal are turned off.

4.2.1. RS-232 Connection via Cradle

To connect the cradle F970 to the host computer proceed as follows:
1 - connect the serial port of the host computer to cable 94A054000 for 9-pin
connections or to cable 94A054010 for 25-pin connections;
2 - connect the other end of the same cable (RJ connector) to the RS-232 port of
the cradle;
3 - insert the power-supply plug into the outlet on the base of the cradle;
4 - attach the power supply to a power outlet
5 - turn on the cradle and the computer.
6 - put the F7400 terminal into its cradle.
A
B
C
Key:
A) Host computer
B) Cradle F970
C) Cradle power supply
Ed.: 06/00
4
19