Datalogic Formula F7400 User Manual page 53

Table of Contents

Advertisement

USE AND FUNCTIONING ________________________________________________________
C) functions of the key when preceeded by a SHIFT keypress (SHIFT mode). More
precisely after pressing [SHIFT]:
- Press [:] once to get the first symbol (\)
- Press [:] twice to get the second symbol (|)
- Press [:] three times to get the third symbol (_)
When you press the key the first time, the cursor is turned to the '\' symbol to
show you the currently selected symbol. If you press the key again the symbol
turns to '|'.
To make the system accept your selection, just wait 2 seconds.
If you are inputing more than one symbol or character, as you press the next
key
the
operation
[SHIFT]-[7]-[SHIFT]-[7]-[7]-[SHIFT]-[7]-[7]-[7] in sequence.
FUNC
CTRL
SHIFT
ALT
Ed.: 06/00
continues.
FUNC MODE
Switches keyboard to the function FUNC mode from the
NORMAL mode.
The keyboard remains in this mode only when the next general
key is pressed, then it returns to the previous mode.
For example, to press the [F1] key, press the [FUNC]-[1] in
sequence
SHIFT MODE
On the F7400, the [SHIFT] key is not pressed at the same time
with other keys. Its function is to switch the keyboard into the
SHIFT symbols mode from the NORMAL mode.
The keyboard remains in this new mode until the symbol is
accepted, then it returns to the previous mode.
For example, to press the [&] key, press the [SHIFT]-[0]-[0]-[0] in
sequence.
Do not confuse this key with the [SHIFT] key
on a PC keyboard which is used to switch
between upper and lower case characters.
For
example,
to
write
ABC,
6
press
49

Advertisement

Table of Contents
loading

Table of Contents